Full Description
201997-C5-HSM-ASSEMBLY\nHYDRAULIC SUPPLY MODULE ASSEMBLY -\nAssembly consists of Fabrication, Hydraulic and\nElectrical components as per drawing package\nP/N# 201997-C5.\nFollowing Task must be performed by Supplier\n(Assembler)\n1) Assembly should be built as per Drawing\nPackage PN# 201997-C5 provided by Testek.\n2) All components must be purchased by Supplier\n(Assembler) based on BOM provided by Testek.\n3) If the Supplier feels that the component from\nthe bill of material cannot be procured from the\nmarket,\nthose components will be provided by Testek upon\nrequest from Supplier.\n4) If the parts which are in the bill of material and\nthey have become obsolete from the market,\nalternative parts\nfor the same part will be procured from the\nsupplier. But before use of alternative parts\nsupplier must ask\nfor permission to use those alternative parts from\nTestek and it has to be used in the assembly\nwhich\nwill be used only after the approval of Testek.\n5) All listed below items are provided by Testek to\nSupplier. Testek must receive all the items at\nTestek Wixom facility\nand ship to Supplier once it received alls.\n6) Scope of Supply by Testek: Item # 32, 409,413,\n457, 470, E401.1, E401.2,E402.1, M7.\nApart from this item list if any additional items\nrequested from Testek will be bring to\nTestek notice and those items cost will be adjusted\nfrom Assembly Charges.\n7) Prior to shipment Supplier (Assembler) must\nprovide pictures of individual Assembly, QC Test\nReport and filled ATP which provided by Testek.\n8) Filled ATP from Supplier (Assembler) must be\nApproved by Testek prior to shipment of\nAssembly.