Full Description
Design pressure :- 25 Kg/Cm²\r\nInlet Temp.: 90°C\r\nOutlet temp.: 135°C\r\nPower: 16 KW 460V 3 Phase Delta (15W/IN²) \r\n\r\nMounting Arrangement: Horizontal with MS Fabricated Legs\r\n\r\nVessel Construction:\r\nM.S Shell size 6" NB Sch 40 MS Shell\r\nSize: Od-168.30 mm, 7.11 mm T x 1200.00 mm TL Including Dishend\r\nIn/Out Nozzle: 1" NPT Female MS \r\n\r\nCoupling inlet and outlet \r\n\r\nDrain and Vent: 3/4" SS-304 1 Pc Each \r\n\r\nElement Design:\r\nM.S Flange: WNRF MS 6" NB 300# OD-317.50 mm x 35.10 mm T x PCD: 269.70 with 12 hole of 22.20 mm Dia \r\n\r\nHeating Element:\r\nSS-304 , Seamless 11 mm Tube dia x 1050 mm Immersion Length x 50 mm Cold zone x 1000 mm Heating zone x 152 mm Flange to terminal L (12 nos. Active + 2 Pcs. Spare U shape element) 1.33 KW each x 12 nos = 16 KW + 2.666 KW \r\n\r\nThermowell: \r\n1 Pc thermowell Welded in middle of the heater Bundle.\r\n\r\nSafety: \r\n1 Pc "J" Type thermocouple For Primary Over Temperature Heater bundle protection and 1 Pc, PT-100 Sensor at outlet Nozzle of oil\r\n\r\nBuffels: \r\nSS-304 1 Pc full + 3 nos of Half Cut buffle will be provide with 4 Pcs of tie rod\r\n\r\nGasket: \r\nViton gasket 1 Pc will be given for main heater bundle.\r\n\r\nFasteners:\r\nSS-304 Fasteners will be given along with main tube sheet\r\n\r\nTerminal Box:\r\nAluminum die casted CCOE / CIMFR certified flameproof terminal Box with 3 Pcs suitable cable glands.\r\n\r\nMounting:\r\nThe vessel will be Horizontally mounted with MS Fabricated Two Legs. \r\n\r\nThe heaters are designed to be mounted on a suitable frame work as per drawing.\r\n\r\n\r\nNon Destructive Testing:\r\n \r\nThe system will be tested and inspected in accordance with applicable code requirements including 100% Non Destructive Testing of all pressure and attachment welds.